Shop by vehicle


Your Garage


You can login or create an account to save vehicles to your personal garage.
Getting current inventory...

Smog Block Off Plates BMW S1000RR / S1000R / S1000XR

$34.99

Add to Cart:


Please select a vehicle to verify part fitment

Details

  • SKU: AB016
  • Manufacturer: Graves

Description

  • Material: Billet aluminum
  • Type: Smog block offs

California Restricted

California laws prohibit (in most cases) the use of any aftermarket product whose installation requires the removal of any emissions control related components as regulated by the California Air Resources Board (www.arb.ca.gov).

If an item is designated as "Competition and Racing Vehicles Only", we will require a race waiver be digitally signed before an item can ship to California. If an item is to be exported from California, an export waiver is available as well. This is a REQUIRED guarantee from you that a restricted item will NOT be used on any public highway in California; only on private race tracks in racing or competition use.

Graves Motorsports Smog Block Off Plates for Yamaha model Sport Bikes. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). Sold in pairs The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons. Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike; 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance. 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio. 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.


This part fits the following

TypeMakeModelYearEngineLocationRequiredNotes
MotorcycleBMWS1000R20149991
MotorcycleBMWS1000R20159991
MotorcycleBMWS1000R20169991
MotorcycleBMWS1000R20179991
MotorcycleBMWS1000R20189991
MotorcycleBMWS1000R20199991
MotorcycleBMWS1000RR20109991
MotorcycleBMWS1000RR20119991
MotorcycleBMWS1000RR20129991
MotorcycleBMWS1000RR20139991
MotorcycleBMWS1000RR20149991
MotorcycleBMWS1000RR20159991
MotorcycleBMWS1000RR20169991
MotorcycleBMWS1000RR20179991
MotorcycleBMWS1000RR20189991
MotorcycleBMWS1000XR20159991
MotorcycleBMWS1000XR20169991
MotorcycleBMWS1000XR20179991
MotorcycleBMWS1000XR20189991
MotorcycleBMWS1000XR20199991


This product was added to our catalog on Tuesday 27 September, 2016.




Copyright © 2022 Starcycle Powered by Zen Cart.
Your IP Address is: 44.210.85.190
Parse Time: 0.665 - Number of Queries: 147 - Query Time: 0.039213962112426